Eco-Friendly Stainless-Steel Cleaning Agents

There are a lot of eco-friendly cleaning agents which can be used safely on stainless steel materials. Some of these eco-friendly cleaning solutions include water and baking soda, rotten stone and a paste of ammonia (also known as the rottenstone or a mixture of water and vinegar. 

How to Get Rid of Stubborn Dirt from Your Stainless-Steel Appliance 

A cleaning agent of mild detergent or dish washing soap and water may be used to get rid of stubborn stains or dirt. If you cannot take the dirt off from a wipe of a clean, soft cloth, then try dissolving some cleaning agent into the grime and dirt for a few minutes, then once again try to wipe it all off. If the grime is dried on, you may scrape it off with the use of something plastic which will not scratch the stainless-steel material. Next, wipe the portion with the use of some water and solution of soap. When you are done, make sure to wipe the area dry using a clean, soft and dry cloth, and wipe it with the grain. 

Stainless Steel Polishing Tips 

An inexpensive and easy way to polish or get rid of streaks from your stainless-steel appliances is to use a little amount of olive oil, mineral oil or baby oil on a paper towel in order to wipe the surface. As a matter of fact, you may use white vinegar, rubbing alcohol or club soda which is used to a lint-free cloth. In addition to that, these products will draw out the natural shine which a stainless steel usually has. When you are done using your chosen oil, get rid of the residues with the use of a clean, dry cloth. Having said that, always rub the surface with the grain of your stainless steel to refrain streaking. 

How to Take Care of a Stainless-Steel Appliance 

Do not ever use an abrasive cleaning tool or abrasive cleaning solution on any of your stainless-steel appliance. If you are not so sure if the solution is safe for the stainless-steel material, do not use it until you are 100% certain. If a cleaning agent is safe for your stainless-steel appliance or manufactured specifically for that kind of material, then it will be indicated on its container. Every time you use a new cleaning solution product, whether it is homemade or commercial, you should first test it on the inconspicuous spot. Do not use bleach on any of your stainless-steel appliance. 

Cooker Hood 

Home kitchens are basically one of the most vital rooms or portions in modern houses. In fact, a cooker hood is certainly a requirement and a need for modern kitchens since a modern kitchen functions as more than just a storage of food. This is why for the maintenance a cleaning, hiring professional Charlotte hood cleaners is highly advised. 

How to Choose a Cooker Hood 

It is usually built above the stove in order to help get rid of the cooking odors and smoke. Nowadays, homes use kitchen as entertainment areas and offices therefore, an efficient cooker hood is very important. 

Cloudy Swimming Pool Cleaning Tips

A cloudy swimming pool isn’t really an inviting sight regardless of how hot the weather condition may be. A cloudy pool water is basically caused by filtration problems, algae, low chlorine levels, high total alkalinity, incorrect pH, high conditioner levels or calcium. In addition to that, a cloudy water is sometimes red, green or milky white. 

Cloudy or Milky Water 

There are a lot of possible causes of a cloudy or milky water. You may use a pool test to diagnose the following: 

  1. The chlorine effectivity is reduced since the cyanuric acid is accumulated in the water. The cyanuric acid dilutes the chorine effectivity to fight off bacteria. You should drain the current pool water and then, add new water. This will reduce the levels of cyanuric acid, and at the same time, super chlorinate the pool to the recommended levels or to 10 ppm.
  2. Accumulation of pollution and dirt because of low levels of chlorine. Reverse the filter flow as well as send the water out the waste lines. This is also known as backwashing your filter. Then, super chlorinate the pool water by adding either calcium hypochlorite or hypochlorite in order to increase the levels of chlorine.
  3. Fine hard salt substances are usually suspended within the pool water forming a cloudy, milky white appearance. As a matter of fact, this is because of the high total alkalinity or high pH levels or both, lower the alkalinity or pH levels with the use of a dry acid. In order to fix this problem, add some dry acid to a 1 kilogram per 100-meter rate per day until the readings are already correct.

The filter is blocked or clogged, check for debris or dirt build-up and change the filter if needed. If you’re not sure how to replace a filter, refer to the pool manufacturer. 

Cloudy, Green Water 

This may be caused by algae formation. Shock-dose with chlorine using algaecide, sodium hypochlorite or calcium hypochlorite. For tented green water, you may super chlorinate your pool water to 10ppm. However, if the pool water is pea soup, adjust super chlorination to 25 ppm. Furthermore, brush off algae accumulation along your pool surfaces and then, backwash the clarifier. 

Rusty Red Water 

This is due to corroded pipes and ferrous metal fittings in your pool circulatory system. Chlorine actually oxidizes with metal forming rust. If this happens, contact the pool dealership immediately to see if it’s still safe to drain your pool water. You’ll have to take out all the rust from your pool with a good liner and tile cleaner. Change the metal parts with copper or PVC tubing. 

Prevention is certainly the best course of action in dealing with your pool water. The maintenance equipment and surfaces of the pool should be cleaned at least once per week. Add oxidizing chemicals to your skimmer once in 30 days to clean out your filter lines. You should also test the pool water on a daily basis. Contact a pool cleaning San Antonio professional for more details.